|
| |
BENCH TOP MICRO BEAD BLASTER
Coarse or fine grades of blast media at the flick of a switch
Small and difficult to reach areas such as those frequently found within precision built components can now be cleaned and finished to the highest standards using the ultra-fine micro-nozzle pressure feed system introduced by bead blasting machinery manufacturers Guyson International Limited.
| |
The Guyson Miniblaster II system is equipped with two pencil shaped, micro blast nozzles with internal diameters as fine as 0.8mm, 1.2mm or 1.8mm to pressure blast ultra fine media of a particle size of less than 300 microns. Controlled by a common foot pedal and selected by a switch system, each micro nozzle operates independently from one of two pressure vessels; each can contain blast media selected to produce the finish required, e.g. one coarse and one fine. Operational blasting time can be extended to several hours, without replenishing media, by fitting additional media reservoirs, available as an optional extra, which screw onto the existing media containers.
A compact unit, the Miniblaster II measures only 300mm high by 300mm wide and 230mm deep and has been designed primarily as a retrofit spot blast-finishing tool to complement most blast cabinet installations. Available as either a single or twin micro nozzle system, it can be factory fitted by Guyson as an optional modification to any new beadblast cabinet purchased from their standard Formula or Euroblast range. It can also be used as a freestanding blast unit providing all necessary protective measures are taken.
|
Typical usage includes the deburring and deflashing of precision parts, selective conformal coating removal from printed circuit boards, micropeening, cleaning orifices in turbine blades and the removal of metallic deposits from quartz glass. Dental laboratories and medical departments have also found them most useful for surface preparation, cleaning and deburring of orthodontic devices, surgical instruments and medical implants. And museums and art restorers have also installed many for the cleaning of artefacts, sculptures, jewellery and fossils.
Free component trials
Whether your interest is in blast, wash or ultrasonic cleaning equipment, we offer FREE component trials, with no obligation to buy. To contact Guyson International, call on +44 (0)1756 799911, fax +44 (0)1756 790213, or email info@guyson.co.uk.
|
| |
|
|
