|
| |
STENCIL CLEANER
The Microclean SC1000 cleans SMT stencils and misprinted PCBs, removing solder paste and adhesives to the highest cleaning standards.
Operation is fully automatic, with PLC-based controls. The operator simply places the stencil inside the chamber, selects from up to eight programs, closes the interlocking lid and presses the ‘Start Cycle’ button.
Cleaning is by motorised rotating spray jets (the system does not use ultrasonics) pump pressurised at up to 60 litres/minute and 4 bar. This is followed by air purging, DI rinsing, a further air purge, and warm air drying.
The SC1000 stencil cleaner uses safe and economic aqueous chemistry with closed loop operation to minimise waste effluent.
 | Microclean SC1000 leaflet*
|
|
|
|
SC1000 at Zestron's Shanghai Technical Center
A clean stencil is a productive stencil
* To view the PDF leaflet on the SC1000 stencil cleaner you will need Adobe Acrobat Reader. If you do not have this software please use the link provided left to download a FREE copy.
To view the leaflet click the PDF button. To save the leaflet to your computer right click the button, select 'Save Target As..' and choose a location to save the file to.
|
| |
|
|
